Fossil

/*
** SETTING: email-subname             width=16
** This is a short name used to identifies the repository in the Subject:
** line of email alerts. Traditionally this name is included in square
** brackets. Examples: "[fossil-src]", "[sqlite-src]".
*/
/*
** SETTING: email-send-method         width=5 default=off
** Determine the method used to send email.  Allowed values are
** "off", "relay", "pipe", "dir", "db", and "stdout".  The "off" value
** means no email is ever sent.  The "relay" value means emails are sent
** to an Mail Sending Agent using SMTP located at email-send-relayhost.
** The "pipe" value means email messages are piped into a command 
** determined by the email-send-command setting. The "dir" value means
** emails are written to individual files in a directory determined
** by the email-send-dir setting.  The "db" value means that emails
** are added to an SQLite database named by the* email-send-db setting.
** The "stdout" value writes email text to standard output, for debugging.
*/
/*
** SETTING: email-send-command       width=40
** This is a command to which outbound email content is piped when the
** email-send-method is set to "pipe".  The command must extract
** recipient, sender, subject, and all other relevant information
** from the email header.
*/
/*
** SETTING: email-send-dir           width=40
** This is a directory into which outbound emails are written as individual
** files if the email-send-method is set to "dir".
*/
/*
** SETTING: email-send-db            width=40
** This is an SQLite database file into which outbound emails are written
** if the email-send-method is set to "db".
*/
/*
** SETTING: email-self               width=40
** This is the email address for the repository.  Outbound emails add
** this email address as the "From:" field.
*/
/*
** SETTING: email-send-relayhost      width=40
** This is the hostname and TCP port to which output email messages
** are sent when email-send-method is "relay".  There should be an
** SMTP server configured as a Mail Submission Agent listening on the
** designated host and port and all times.
*/

*/
/*
** SETTING: admin-log       boolean default=off
**
** When the admin-log setting is enabled, configuration changes are recorded
** in the "admin_log" table of the repository.
*/
#if defined(_WIN32)
/*
** SETTING: allow-symlinks  boolean default=off versionable
**
** When allow-symlinks is OFF, symbolic links in the repository are followed
** and treated no differently from real files.  When allow-symlinks is ON,
** the object to which the symbolic link points is ignored, and the content
** of the symbolic link that is stored in the repository is the name of the
** object to which the symbolic link points.
*/
#endif
#if !defined(_WIN32)
/*
** SETTING: allow-symlinks  boolean default=on versionable
**
** When allow-symlinks is OFF, symbolic links in the repository are followed
** and treated no differently from real files.  When allow-symlinks is ON,
** the object to which the symbolic link points is ignored, and the content
** of the symbolic link that is stored in the repository is the name of the
** object to which the symbolic link points.
*/
#endif
/*
** SETTING: auto-captcha    boolean default=on variable=autocaptcha
** If enabled, the /login page provides a button that will automatically
** fill in the captcha password.  This makes things easier for human users,
** at the expense of also making logins easier for malicious robots.
*/
/*

** Backoffice processing does things such as delivering
** email notifications.  So if this setting is true, and if
** there is no cron job periodically running "fossil backoffice",
** email notifications and other work normally done by the
** backoffice will not occur.
*/
/*
** SETTING: backoffice-logfile width=40
** If backoffice-logfile is not an empty string and is a valid
** filename, then a one-line message is appended to that file
** every time the backoffice runs.  This can be used for debugging,
** to ensure that backoffice is running appropriately.
*/
/*
** SETTING: binary-glob     width=40 versionable block-text

** The crnl-glob setting is a compatibility alias.
*/
/*
** SETTING: crnl-glob       width=40 versionable block-text
** This is an alias for the crlf-glob setting.
*/
/*
** SETTING: default-perms   width=16 default=u
** Permissions given automatically to new users.  For more
** information on permissions see the Users page in Server
** Administration of the HTTP UI.
*/
/*
** SETTING: diff-binary     boolean default=on
** If enabled, permit files that may be binary
** or that match the "binary-glob" setting to be used with
** external diff programs.  If disabled, skip these files.
*/
/*
** SETTING: diff-command    width=40
** The value is an external command to run when performing a diff.
** If undefined, the internal text diff will be used.
*/
/*
** SETTING: dont-push       boolean default=off
** If enabled, prevent this repository from pushing from client to
** server.  This can be used as an extra precaution to prevent
** accidental pushes to a public server from a private clone.
*/
/*
** SETTING: dotfiles        boolean versionable default=off
** If enabled, include --dotfiles option for all compatible commands.
*/
/*
** SETTING: editor          width=32
** The value is an external command that will launch the
** text editor command used for check-in comments.
*/
/*
** SETTING: empty-dirs      width=40 versionable block-text
** The value is a comma or newline-separated list of pathnames. On
** update and checkout commands, if no file or directory

** A comma- or newline-separated list of globs of filenames
** which are allowed to be edited using the /fileedit page.
** An empty list prohibits editing via that page. Note that
** it cannot edit binary files, so the list should not
** contain any globs for, e.g., images or PDFs.
*/
/*
** SETTING: gdiff-command    width=40 default=gdiff
** The value is an external command to run when performing a graphical
** diff. If undefined, text diff will be used.
*/
/*
** SETTING: gmerge-command   width=40
** The value is a graphical merge conflict resolver command operating
** on four files.  Examples:
**
**     kdiff3 "%baseline" "%original" "%merge" -o "%output"
**     xxdiff "%original" "%baseline" "%merge" -M "%output"
**     meld "%baseline" "%original" "%merge" "%output"
*/

** SETTING: mv-rm-files      boolean default=off
** If enabled, the "mv" and "rename" commands will also move
** the associated files within the checkout -AND- the "rm"
** and "delete" commands will also remove the associated
** files from within the checkout.
*/
/*
** SETTING: pgp-command      width=40
** Command used to clear-sign manifests at check-in.
** Default value is "gpg --clearsign -o"
*/
/*
** SETTING: forbid-delta-manifests    boolean default=off
** If enabled on a client, new delta manifests are prohibited on
** commits.  If enabled on a server, whenever a client attempts

** have a non-zero "repolist-skin" setting then the repository list is
** displayed using unadorned HTML ("skinless").
**
** If repolist-skin has a value of 2, then the repository is omitted from
** the list in use cases 1 through 4, but not for 5 and 6.
*/
/*
** SETTING: self-register    boolean default=off
** Allow users to register themselves through the HTTP UI.
** This is useful if you want to see other names than
** "Anonymous" in e.g. ticketing system. On the other hand
** users can not be deleted.
*/
/*
** SETTING: ssh-command      width=40
** The command used to talk to a remote machine with  the "ssh://" protocol.
*/
/*
** SETTING: ssl-ca-location  width=40
** The full pathname to a file containing PEM encoded
** CA root certificates, or a directory of certificates
** with filenames formed from the certificate hashes as
** required by OpenSSL.
**
** If set, this will override the OS default list of
** OpenSSL CAs. If unset, the default list will be used.
** Some platforms may add additional certificates.
** Checking your platform behaviour is required if the
** exact contents of the CA root is critical for your
** application.
*/
/*
** SETTING: ssl-identity     width=40
** The full pathname to a file containing a certificate
** and private key in PEM format. Create by concatenating
** the certificate and private key files.
**
** This identity will be presented to SSL servers to
** authenticate this client, in addition to the normal
** password authentication.
*/
#ifdef FOSSIL_ENABLE_TCL
/*
** SETTING: tcl              boolean default=off
** If enabled Tcl integration commands will be added to the TH1
** interpreter, allowing arbitrary Tcl expressions and
** scripts to be evaluated from TH1.  Additionally, the Tcl
** interpreter will be able to evaluate arbitrary TH1
** expressions and scripts.
*/
/*
** SETTING: tcl-setup        width=40 block-text
** This is the setup script to be evaluated after creating
** and initializing the Tcl interpreter.  By default, this
** is empty and no extra setup is performed.
*/
#endif /* FOSSIL_ENABLE_TCL */
/*
** SETTING: tclsh            width=80 default=tclsh
** Name of the external TCL interpreter used for such things
** as running the GUI diff viewer launched by the --tk option
** of the various "diff" commands.
*/
#ifdef FOSSIL_ENABLE_TH1_DOCS
/*
** SETTING: th1-docs         boolean default=off
** If enabled, this allows embedded documentation files to contain
** arbitrary TH1 scripts that are evaluated on the server.  If native
** Tcl integration is also enabled, this setting has the
** potential to allow anybody with check-in privileges to
** do almost anything that the associated operating system
** user account could do.  Extreme caution should be used
** when enabling this setting.

** SETTING: uv-sync          boolean default=off
** If true, automatically send unversioned files as part
** of a "fossil clone" or "fossil sync" command.  The
** default is false, in which case the -u option is
** needed to clone or sync unversioned files.
*/
/*
** SETTING: web-browser      width=30
** A shell command used to launch your preferred
** web browser when given a URL as an argument.
** Defaults to "start" on windows, "open" on Mac,
** and "firefox" on Unix.
*/

/*

#define CMDFLAG_WEBPAGE     0x0008      /* Web pages */
#define CMDFLAG_COMMAND     0x0010      /* A command */
#define CMDFLAG_SETTING     0x0020      /* A setting */
#define CMDFLAG_VERSIONABLE 0x0040      /* A versionable setting */
#define CMDFLAG_BLOCKTEXT   0x0080      /* Multi-line text setting */
#define CMDFLAG_BOOLEAN     0x0100      /* A boolean setting */
#define CMDFLAG_RAWCONTENT  0x0200      /* Do not interpret webpage content */

/**************************************************************************/

/*
** Each entry looks like this:
*/
typedef struct Entry {
  int eType;        /* CMDFLAG_* values */

      aEntry[nUsed].iWidth = 0;
      aEntry[nUsed].eType |= CMDFLAG_BOOLEAN;
    }else if( j==10 && strncmp(&zLine[i], "block-text", j)==0 ){
      aEntry[nUsed].eType &= ~(CMDFLAG_BOOLEAN);
      aEntry[nUsed].eType |= CMDFLAG_BLOCKTEXT;
    }else if( j==11 && strncmp(&zLine[i], "versionable", j)==0 ){
      aEntry[nUsed].eType |= CMDFLAG_VERSIONABLE;


    }else if( j>6 && strncmp(&zLine[i], "width=", 6)==0 ){
      aEntry[nUsed].iWidth = atoi(&zLine[i+6]);
    }else if( j>8 && strncmp(&zLine[i], "default=", 8)==0 ){
      aEntry[nUsed].zDflt = string_dup(&zLine[i+8], j-8);
    }else if( j>9 && strncmp(&zLine[i], "variable=", 9)==0 ){
      aEntry[nUsed].zVar = string_dup(&zLine[i+9], j-9);
    }else{